氧化纤维素的制备研究

介绍了氧化纤维素 (DAC)的制备过程 ,用正交法探讨了以NaIO4 作氧化纤维素时反应温度、溶液pH值、氧化剂浓度、反应时间以及交互作用对DAC醛基含量的影响 ,找到了影响醛基含量的主要因素为反应温度、反应温度与NaIO4 的交互作用、反应温度与溶液 pH值的交互作用。初步确定了制备氧化纤维素的反应工艺 ,使醛基含量较高时的最佳反应条件为 :反应温度 3 5℃ ,反应时间 3h ,NaIO4 质量分数 6.78% ,pH值为 2时 ,醛基含量达 68.2 0 %。     

2,4-D/CMC接枝物纳米粒子的制备与缓释性能研究

以羧甲基纤维素钠（CMC）为基材，甲基丙烯酸甲酯（MMA）和二甲基二烯丙基氯化铵（DMDAAC）为改性单体，通过乳液聚合制备了CMC-g-P(MMA-DMDAAC)共聚物，采用自组装方法负载2,4-二氯苯氧乙酸（2,4-D）得到2,4-D/CMC-g-P(MMA-DMDAAC)纳米药物缓释体系。利用傅里叶红外光谱（FTIR）、差示扫描量热法（DSC）、热重分析（TGA）、扫描电镜（SEM）、粒度分析仪对其结构和形貌进行表征，并探究其载药性能和缓释性能。结果表明，2,4-D/CMC-g-P(MMA-DMDAAC)载药粒子呈笼状结构，粒度分布为160～425 nm；其载药率随着CMC∶MMA∶DMDAAC的摩尔比增大而提高，最高可达40.8%；其药物累计释放率随CMC∶MMA∶DMDAAC的摩尔比增大而降低，其释放行为符合Weibull模型，遵循Fick扩散机理。     

纤维素衍生物液晶相转变和织态结构

本文综述了纤维素衍生物液晶态相转变和织态结构。描述了纤维素衍生物从各向同性态向液晶态的转变过程和液晶态的织构特征。讨论了溶液浓度和温度对液晶相织构的影响。探讨了各种因素,如溶剂、取代基含量、外加力场和外加磁场等对液晶相的形成及织态结构的影响。     

羧甲基纤维素包覆天然石墨性能的研究

本实验研究了羧甲基纤维素(CMC)包覆对天然石墨电化学性能的影响。通过XRD、恒电流充放电测试手段研究了不同包覆量对该复合材料结构和电化学性能的影响。结果表明:羧甲基纤维素裂解炭对天然石墨有较好的包覆作用,并且能够有效的阻止石墨在充放电过程中发生层状剥落现象,从而有效的提高复合炭材料的循环稳定性,其中5%树脂包覆量的复合材料在循环50次之后可逆容量是310.9 mAh.g-1,比天然石墨高50 mAh.g-1,并保持了首次可逆容量的97.1%。     

Infrared study of salt free and salt treated cellulose pyrolysis under nitrogen atmosphere

The pyrolysis under nitrogen of salt free and salt treated cellulose was studied by infrared spectroscopy. The results confirm the unzipping mechanism suggested by DTA and TGA studies, and show this mechanism to apply to the untreated and salt treated samples. The results also show the unzipping to stop at the stage of char formation. The onset of this stage was found to occur after the volatilization of only 45–50% of the initial sample of the borax treated cellulose, compared with 65–70% of the KCl treated cellulose and 80–85% of the untreated cellulose.     

纤维素醚的特点、制备及在工业中的应用

综述了纤维素醚的种类、制备方法、性能和特点,以及纤维素醚在石油、建筑、造纸、纺织、医药、食品、光电材料及日化工业中的应用,介绍了一些具有发展前景的纤维素醚类衍生物的新品种并展望其应用前景。     

纤维素/NMMO·H_2O溶液体系流变性能的研究

利用 Brookfield DV-Ⅱ型粘度计对纤维素/NMMO·H2O 溶液体系的流变性能进行了研究,讨论了温度、纤维素浓度、浆粕聚合度及添加剂等对溶液粘度的影响。结果表明,纤维素/NMMO·H2O 溶液的流动活化能较低,因此其表观粘度随温度的变化不大;纤维素浓度和浆粕聚合度的增加都可使溶液粘度增大,但纤维素浓度对溶液粘度的影响更显著;抗氧化剂没食子酸丙酯(GPE)的加入减缓了加热时溶液粘度的下降,降低了纤维素的氧化降解;二甲亚砜(DMSO)的加入可有效地控制溶液粘度,改善溶液的加工性能。     

Structure and properties of regenerated cellulose films coated with polyurethane–nitrolignin graft‐IPNs coating

A regenerated cellulose film (RC) was coated with a graft‐IPNs coating, which was composed of castor oil‐based polyurethane and 2.8 wt % nitrolignin (NL), to obtain water‐resistant films. The effects of NCO/OH molar ratio and different polyols, such as 1,4‐butanediol (BDO) and trimethanol propane (TMP), on the structure and properties of the coated RC films were investigated. With an increase of the NCO/OH molar ratio, the tensile strength of the coated films increased, but the water resistivity and size contraction hardly changed. The coated films with TMP exhibited the higher breaking elongation at 1.5 of the NCO/OH molar ratio, while those with BDO have more excellent tensile strength, water resistivity, and dimensional stability. The coated films with the graft‐IPNs coating exhibited superior water resistivity and dimensional stability. The light transmittance of the coated films was more excellent than that of the RC film. Moreover, the results from the IR and electron probe microanalysis (EPMA) showed that the chemical bonding occurred between cellulose and coating, and the introduction of NL plays an important role in the enhancement of the interface adhesion of the coated films. Atomic force microscopy (AFM) depicted the flat and dense surface of the coated films, which restricted the water vapor penetration and the size contraction, resulting in the enhancement of water resistivity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1799–1806, 2002     

乙醇生产集成工艺流程的环境与经济性评价分析(英文)

乙醇是一种非常重要的可再生燃料,在本文中,从环境影响和经济效益的角度对不同的原料玉米、纤维素和乙烯生产制乙醇的工艺过程进行了评估,并利用AspenPlus模拟软件中的严格物料和能量平衡模块对典型的生产工艺进行了设计、模拟和优化。基于模拟的结果,提出了定量的环境影响方法一绿色度理论,并通过综合对比文献中报道的数据和模拟数据表明,纤维素制乙醇具有更强的环境影响优势,但在经济效益方面仍需要进一步改进。     

羧甲基纤维素阳离子化衍生物的研究现状

羧甲基纤维素阳离子化改性是制备性能优良的天然两性高分子的重要方法之一。文章综述了迄今为止羧甲基纤维素阳离子化改性所用的阳离子单体的主要类型及其接枝的若干主要途径,其中包括自由基型接枝共聚、高分子侧基反应、聚合后功能化等三大类。